Image Gallery

Clear Filters | 1 - 20 of 51 results

311th AMU replaces wiring throughout F-16 Viper

Senior Airman Brian Raatz, 311th Aircraft Maintenance Unit F-16 Viper crew chief poses for a photo, June 4, 2020, on Holloman Air Force Base, N.M. Three Airmen from the 311th AMU are replacing 11 wire harnesses throughout the plane that range up to 90 feet of wiring, which can take up to three months to repair. (U.S. Air Force photo illustration by Staff Sgt. Christine Groening)
Details Download

311th AMU replaces wiring throughout F-16 Viper

Airman 1st Class Gabriel Leal, 311th Aircraft Maintenance Unit avionics journeyman, smiles for the camera, June 4, 2020, on Holloman Air Force Base, N.M. Three Airmen from the 311th AMU are replacing 11 wire harnesses throughout the plane that range up to 90 feet of wiring, which can take up to three months to repair. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

311th AMU replaces wiring throughout F-16 Viper

Staff Sgt. Chase Doering, 311th Aircraft Maintenance Unit avionics craftsman, performs maintenance on an F-16 Viper, June 4, 2020, on Holloman Air Force Base, N.M. Airmen from the 311th AMU are replacing 11 wire harnesses in the 31-year-old aircraft that caught fire last year. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

311th AMU replaces wiring throughout F-16 Viper

Airman 1st Class Gabriel Leal, 311th Aircraft Maintenance Unit avionics journeyman, watches as Senior Airman Brian Raatz, 311th AMU F-16 Viper crew chief, inspects wiring on an aircraft, June 4, 2020, on Holloman Air Force Base, N.M. Three Airmen from the 311th AMU are replacing 11 wire harnesses throughout the plane that range up to 90 feet of wiring, which can take up to three months to repair. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

311th AMU replaces wiring throughout F-16 Viper

Airmen from the 311th Aircraft Maintenance Unit perform maintenance on an F-16 Viper, June 4, 2020, on Holloman Air Force Base, N.M. The Airmen are replacing 11 wire harnesses and have been working on the project since early May 2020. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

311th AMU replaces wiring throughout F-16 Viper

Airman 1st Class Gabriel Leal, 31tth Aircraft Maintenance Unit avionics journeyman, smiles as he speaks with Senior Airman Brian Raatz, 311th AMU F-16 Viper crew chief, June 4, 2020, on Holloman Air Force Base, N.M. The Airmen are replacing 11 wire harnesses and have been working on the project since early May 2020. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

311th AMU replaces wiring throughout F-16 Viper

Senior Airman Brian Raatz, 311th Aircraft Maintenance Unit F-16 crew chief performs maintenance on a F-16, June 4, 2020, on Holloman Air Force Base, N.M. Airmen from the 311th AMU are replacing 11 wire harnesses in the 31-year-old aircraft that caught fire last year. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

The 49th MXG Changes Command

(From right to left) Col. Thomas Preston, incoming 49th Maintenance Group commander; Col. Tim Harbor, outgoing 49th MXG commander and Col. Joseph Campo, 49th Wing commander, render salutes during the 49th MXG Change of Command ceremony, May 15, 2020, on Holloman Air Force Base, N.M. The 49th MXG consists of a team of over 2,100 Airmen, civilians and contractors from 23 specialties to produce disciplined maintenance and sortie-generation capabilities on F-16 Vipers, MQ-9 Reapers and their associated cockpits. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

The 49th MXG Changes Command

(Center) Col. Thomas Preston, incoming 49th Maintenance Group commander, renders a salute to Col. Joseph Campo, 49th Wing commander, as he assumes command of the 49th MXG, May 15, 2020, on Holloman Air Force Base, N.M. Preston was previously assigned to the U.S. European Command J4 as the operational logistics division chief in Stuttgart, Germany. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

The 49th MXG Changes Command

49th Wing Airmen render salutes during the National Anthem at the 49th Maintenance Group Change of Command ceremony May 15, 2020, on Holloman Air Force Base, N.M. Col. Joseph Campo, 49th WG commander, presided over the ceremony, at which Col. Tim Harbor, outgoing 49th MXG commander, relinquished command to Col. Thomas Preston, incoming 49th MXG commander. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

The 49th MXG Changes Command

(Center) Col. Tim Harbor, outgoing 49th Maintenance Group commander, renders a salute to (left) Col. Joseph Campo, 49th Wing commander, as he relinquishes command of the 49th MXG, May 15, 2020, on Holloman Air Force Base, N.M. The 49th MXG consists of a team of over 2,100 Airmen, civilians and contractors from 23 specialties to produce disciplined maintenance and sortie-generation capabilities on F-16 Vipers, MQ-9 Reapers and their associated cockpits. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

The 49th MXG Changes Command

Col. Thomas Preston, 49th Maintenance Group commander, speaks during the 49th MXG Change of Command ceremony, May 15, 2020, on Holloman Air Force Base, N.M. Preston was previously assigned to the U.S. European Command J4 as the operational logistics division chief in Stuttgart, Germany. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Airman 1st Class Curtis Mark, 49th Civil Engineer Squadron electrical power production technician, reinstalls a tape connector on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. The tape connector is part of a BAK-15 Aircraft Arrest System Barrier, which helps pilots safely stop their aircraft in case of an aircraft emergency. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Airman 1st Class Sharn Lucas (center) and Airman 1st Class Nicholas Tirevold, 49th Civil engineer squadron electrical power production technicians, reinstall tape inspection plates on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. The Airmen were conducting overhaul maintenance on the barrier system, which occurs every 42-months. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Airmen from the 49th Civil Engineer Squadron electrical power production shop reinstall a front lead off sheave on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. Every 42-months Airmen perform the sheave overhaul as preventative maintenance, ensuring parts are clean and functional. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Airmen from the 49th Civil Engineer Squadron electrical power production shop reassemble a barrier on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. The Airmen’s daily responsibilities include inspecting and servicing items across base such as the power supply to buildings, anti-vehicle barriers and aircraft arresting system barriers. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Airman 1st Class Curtis Mark (left) and Airman 1st Class Sharn Lucas (right), 49th Civil Engineer Squadron electrical power production technicians, reassemble a front sheave housing plate on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. In addition to ensuring barriers are functional, they maintain power supply to buildings, as well as the anti-vehicle barriers found across the base. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Airmen from the 49th Civil Engineer Squadron electrical power production shop reinstall a front sheave housing on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. In addition to ensuring barriers are functional, Airmen maintain power supply to buildings and the anti-vehicle barriers found across the base. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Senior Airman Wyatt Andrews and Airman 1st Class Curtis Mark, 49th Civil Engineer Squadron electrical power production technicians, perform weekly maintenance and inspections on a BAK-12 Aircraft Arresting System on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. During weekly inspections, Airmen bleed brakes of air and ensure hydraulic pressure is applied to slow down an aircraft safely in an emergency. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Senior Airman Wyatt Andrews, 49th Civil Engineer Squadron electrical power production technician, separates support disks on a barrier system cable on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. The disks are spaced six to eight inches apart and raised two inches off the ground to engage the tailhook off of an aircraft in the event of an emergency. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download