Image Gallery

Clear Filters | 621 - 640 of 943 results

49th Wing receives a new commander

Maj. Gen. Craig Wills, 19th Air Force commander, speaks during the 49th Wing Change of Command ceremony, May 21, 2020, on Holloman Air Force Base, N.M. Wills presided over the ceremony where Col. Ryan Keeney assumed command of the 49th WG. (U.S. Air Force photo by Senior Airman Collette Brooks)
Details Download

49th Wing receives a new commander

Col. Ryan Keeney (right), 49th Wing commander, assumes command from Maj. Gen. Craig Wills (left), 19th Air Force commander, during the 49th WG Change of Command ceremony, May 21, 2020, on Holloman Air Force Base, N.M. Keeney previously served as the Air Education and Training Command Operations and Communications deputy director at Joint Base San Antonio-Randolph, Texas. (U.S. Air Force photo by Tech. Sgt. BreeAnn Sachs)
Details Download

49th Wing receives a new commander

Col. Ryan Keeney, 49th Wing commander, stands at attention after assuming command of the 49th Wing, May 21, 2020, on Holloman Air Force Base, N.M. Holloman is the premiere training base for F-16 Fighting Falcon and MQ-9 Reaper pilots and sensor operators. (U.S. Air Force photo by Tech. Sgt. BreeAnn Sachs)
Details Download

49th Wing receives a new commander

Senior Airman Connor Clark, 849th Aircraft Maintenance Squadron assistant dedicated crew chief, unveils Col. Ryan Keeney’s, 49th Wing commander, name on the 49th WG flagship, May 21, 2020, on Holloman Air Force Base, N.M. Traditionally, the 49th WG flagship bears the name of the current Wing Commander. (U.S. Air Force photo by Tech. Sgt. BreeAnn Sachs)
Details Download

49th Wing receives a new commander

Senior Airman Connor Clark, 849th Aircraft Maintenance Squadron assistant dedicated crew chief, salutes Col. Ryan Keeney, 49th Wing commander, during the 49th WG Change of Command ceremony, May 21, 2020, on Holloman Air Force Base, N.M. Traditionally, the 49th WG flagship bears the name of the current Wing Commander. (U.S. Air Force photo by Tech. Sgt. BreeAnn Sachs)
Details Download

49th Wing receives a new commander

Senior Airman Jorge Garcia, 49th Aircraft Maintenance Squadron assistant dedicated crew chief, unveils Col. Ryan Keeney, 49th Wing commander, and Chief Master Sgt. Thomas Temple’s, 49th WG command chief, name on an MQ-9 Reaper, during the 49th WG Change of Command ceremony, May 21, 2020, on Holloman Air Force Base, N.M. Holloman is the premiere training base for F-16 Fighting Falcon and MQ-9 pilots and sensor operators. (U.S. Air Force photo by Tech. Sgt. BreeAnn Sachs)
Details Download

49th Wing receives a new commander

Staff Sgt. Roberto Ruiz, 49th Aircraft Maintenance Squadron dedicated crew chief and Senior Airman George Garcia, 49th AMXS assistant dedicated crew chief, salute Col. Ryan Keeney, 49th Wing commander, during the 49th WG Change of Command ceremony, May 21, 2020, on Holloman Air Force Base, N.M. Holloman is the premiere training base for F-16 Fighting Falcon and MQ-9 Reaper pilots and sensor operators. (U.S. Air Force photo by Tech. Sgt. BreeAnn Sachs)
Details Download

49th Wing receives a new commander

Col. Joseph Campo (right), outgoing 49th Wing commander, relinquishes command to Maj. Gen. Craig Wills (left), 19th Air Force commander, during the 49th WG Change of Command ceremony, May 21, 2020, on Holloman Air Force Base, N.M. Col. Ryan Keeney assumed command of the 49th WG during a formal ceremony. (U.S. Air Force photo Tech. Sgt. BreeAnn Sachs)
Details Download

The 49th MXG Changes Command

(From right to left) Col. Thomas Preston, incoming 49th Maintenance Group commander; Col. Tim Harbor, outgoing 49th MXG commander and Col. Joseph Campo, 49th Wing commander, render salutes during the 49th MXG Change of Command ceremony, May 15, 2020, on Holloman Air Force Base, N.M. The 49th MXG consists of a team of over 2,100 Airmen, civilians and contractors from 23 specialties to produce disciplined maintenance and sortie-generation capabilities on F-16 Vipers, MQ-9 Reapers and their associated cockpits. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

The 49th MXG Changes Command

(Center) Col. Thomas Preston, incoming 49th Maintenance Group commander, renders a salute to Col. Joseph Campo, 49th Wing commander, as he assumes command of the 49th MXG, May 15, 2020, on Holloman Air Force Base, N.M. Preston was previously assigned to the U.S. European Command J4 as the operational logistics division chief in Stuttgart, Germany. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

The 49th MXG Changes Command

49th Wing Airmen render salutes during the National Anthem at the 49th Maintenance Group Change of Command ceremony May 15, 2020, on Holloman Air Force Base, N.M. Col. Joseph Campo, 49th WG commander, presided over the ceremony, at which Col. Tim Harbor, outgoing 49th MXG commander, relinquished command to Col. Thomas Preston, incoming 49th MXG commander. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

The 49th MXG Changes Command

(Center) Col. Tim Harbor, outgoing 49th Maintenance Group commander, renders a salute to (left) Col. Joseph Campo, 49th Wing commander, as he relinquishes command of the 49th MXG, May 15, 2020, on Holloman Air Force Base, N.M. The 49th MXG consists of a team of over 2,100 Airmen, civilians and contractors from 23 specialties to produce disciplined maintenance and sortie-generation capabilities on F-16 Vipers, MQ-9 Reapers and their associated cockpits. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

The 49th MXG Changes Command

Col. Thomas Preston, 49th Maintenance Group commander, speaks during the 49th MXG Change of Command ceremony, May 15, 2020, on Holloman Air Force Base, N.M. Preston was previously assigned to the U.S. European Command J4 as the operational logistics division chief in Stuttgart, Germany. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Airman 1st Class Curtis Mark, 49th Civil Engineer Squadron electrical power production technician, reinstalls a tape connector on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. The tape connector is part of a BAK-15 Aircraft Arrest System Barrier, which helps pilots safely stop their aircraft in case of an aircraft emergency. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Airman 1st Class Sharn Lucas (center) and Airman 1st Class Nicholas Tirevold, 49th Civil engineer squadron electrical power production technicians, reinstall tape inspection plates on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. The Airmen were conducting overhaul maintenance on the barrier system, which occurs every 42-months. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Airmen from the 49th Civil Engineer Squadron electrical power production shop reinstall a front lead off sheave on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. Every 42-months Airmen perform the sheave overhaul as preventative maintenance, ensuring parts are clean and functional. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Airmen from the 49th Civil Engineer Squadron electrical power production shop reassemble a barrier on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. The Airmen’s daily responsibilities include inspecting and servicing items across base such as the power supply to buildings, anti-vehicle barriers and aircraft arresting system barriers. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Airman 1st Class Curtis Mark (left) and Airman 1st Class Sharn Lucas (right), 49th Civil Engineer Squadron electrical power production technicians, reassemble a front sheave housing plate on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. In addition to ensuring barriers are functional, they maintain power supply to buildings, as well as the anti-vehicle barriers found across the base. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Airmen from the 49th Civil Engineer Squadron electrical power production shop reinstall a front sheave housing on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. In addition to ensuring barriers are functional, Airmen maintain power supply to buildings and the anti-vehicle barriers found across the base. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download

Electrical power production keeping Holloman powered

Senior Airman Wyatt Andrews and Airman 1st Class Curtis Mark, 49th Civil Engineer Squadron electrical power production technicians, perform weekly maintenance and inspections on a BAK-12 Aircraft Arresting System on the flightline, on Holloman Air Force Base, N.M., April 21, 2020. During weekly inspections, Airmen bleed brakes of air and ensure hydraulic pressure is applied to slow down an aircraft safely in an emergency. (U.S. Air Force photo by Staff Sgt. Christine Groening)
Details Download